Using Node-RED for publishing Telldus Live data to MQTT

Tellstick Net and DuoTelldus has a set of nice little gadgets (“Tellstick”, for short) that both allow you to control remote switches over radio (433.92 MHz), and to read sensors transmitting on that same frequency. Telldus also has a backend service, Telldus Live, which offer Tellstick users scheduling features (turning lamps on/off at certain times, or when certain conditions occur), as well as showing the latest sensor readings.

The above is at least true if you have a Tellstick Net, which connects to your home network and sends device and sensor data to the Telldus Live service. You can also achieve the same thing with the non-connected Tellstick models, and an always-on computer running Telldus’ software.

Anyway – let’s assume that Telldus Live can see your switches, sensors and other connected devices. Would it not be cool if you could bring all that data into Node-RED, and from there create whatever feature you dreamt of.

How about sending an SMS when the  garage door is still open, but your presence data indicate that you have left for work? Easy.

Or the opposite: Send a tweet to your Node-RED server, which will then fire off an event to Telldus Live, turning a switch on, and by doing so closing the garage door? No problem.

Continue reading “Using Node-RED for publishing Telldus Live data to MQTT”

Enabling Mosquitto websockets on Synology NAS

Websockets are cool. They are the modern sibling of http in that they run over tcp, but "EthernetCableBlue2" by Raysonho @ Open Grid Scheduler / Grid Engine - Own work. Licensed under CC0 via Wikimedia Commons - https://commons.wikimedia.org/wiki/File:EthernetCableBlue2.jpg#/media/File:EthernetCableBlue2.pngwebsockets offer a lot more, most notably full duplex (i.e. data can be sent in both directions) and realtime delivery of messages.

Those two features enable the creation of web pages that update dynamically as soon as new data is available on the server. No need to reload the web page in the user’s browser.

I have been struggling with how to get websockets integrated with MQTT on my Synology DS1515+ NAS, but in the end it turned out to be pretty easy!

Continue reading “Enabling Mosquitto websockets on Synology NAS”